|
|
PRESSES MODEL 1/2 P
• Compact structure for a maximum stiffness and stability.
• Greater ease of movement around the press during the fixing of the die as well as for the usual operations.
• Safety guards, as standard supply, with enclosure for partial noise reduction.
• Automatic signal light of the anomalies on electric board.
• Adjustable machine stroke visualized in the control panel. The stroke adjustment can be operated easily and simplyby the control panel.
• Crank mechanism consisting of the following: the crank pin (eccentric shaft) transmit the motion to a guide block that acting on the guiding cylinder changers the motion from rotary to alternative motion thus eliminating the side thrusts. • Central guiding plunger the ram adjusting screw has been eliminated, so the plunger rests directly on the ram with a bigger contact, surface thus ensuring improved stability during punching.
• Steel ram electrowelded in slim and light version for reduced caused by the moving masses: the result is a better balanced and stable machine with no need for balancing cylinders.
• Lubrification system central forced throughout machine. The ram is provided with seals for the oil that drops and is collected, filtered and put again into the lubricating circuit.
• Motor driven ram adjustment by means of electric gear motor provided with encoder for the reading of centesimal values that are also visualized in the control panel.
• The upper body of the machine is supported by four tubolar structures. The ram guiding columns pass through the upper body, this means cylinders that lock the columns are always under pressure thus balancing any eventual elongation.
|
Technical Features:
|
MODELS
|
|
1P 30
|
1P 50
|
1P 80
|
2P 50
|
2P 80
|
2P 125
|
|
PRESSURE
|
Kn
|
300
|
500
|
800
|
500
|
800
|
1250
|
|
THRUST POINTS
|
N°
|
1
|
1
|
1
|
2
|
2
|
2
|
|
VARIABLE SPEED
|
C/1’
|
80 – 480
|
80 – 480
|
100 – 400
|
80 – 480
|
120 – 480
|
100 - 400
|
|
RAM TABLE DIST (T.D.C.)
|
mm
|
300
|
380
|
500
|
380
|
500
|
500
|
|
WORKING TABLE SIZE
|
mm
|
690X850
|
900X1020
|
1070X1150
|
1500X1260
|
1560X1275
|
1680X1380
|
|
RAM SIZE
|
mm
|
520X460
|
700X610
|
710X800
|
1300X940
|
1330X955
|
1500X1100
|
|
DISTANCE BETWEEN COLUMNS
|
mm
|
300X300
|
400X400
|
500X450
|
1000X750
|
1000X750
|
1080X780
|
|
FIXED RAM STROKE
|
mm
|
If required
|
If required
|
If required
|
If required
|
If required
|
If required
|
|
VARIABLE STROKE
|
mm
|
10 – 50
|
10 – 50
|
10 – 80
|
10 – 50
|
10 – 80
|
20 – 120
|
|
RAM ADJUSTMENT
|
mm
|
50
|
50
|
50
|
50
|
50
|
50
|
|
POWER REQUIRED
|
Kw
|
7,5
|
11
|
15
|
11
|
15
|
20
|
|
APROXIMATE WEIGHT
|
Kg
|
4000
|
8000
|
10500
|
10500
|
14500
|
18000
|
|
OVERALL DIMENSIONS
|
Mt
|
1,3x1,2x2,8
|
1,6x1,5x3,2
|
1,7x1,5x3,2
|
1,8x1,6x3
|
1,8x1,5x3,5
|
1,9x1,7x3,8
|
All illustration, description and features are given for reference only and may not be considered as binding. The machine tool builder has the capacity to make technical and costruttive modification without notice in order to improve the own products.